Reclaim Heat Pump Controller V1.1

This controller is designed to work only with the Reclaim hot water heat pump distributed by Apricus Australia and New Zealand. The purpose of this controller is to improve efficiency and cost effectiveness for the user.

The controller measures the tank temperature and compares that to set points that it has stored in memory. These set points can be dependant on time of day depending on the option set. Once the lower temperature is reached the controller signals the heat pump to start heating via the RJ45 cable. Once an upper temperature is attained the controller signal the heat pump to stop heating. The controller automatically manages Legionella safety, heating once a day if the Legionella safe temperature has not been attained during the day.

The 7 segment display defaults to time of day but can also show the measured temperature.

The onboard Real Time Clock is maintained by a Super Capacitor on the main circuit board. This will keep the time running for 3 weeks with no power applied but itself should last for the lifetime of the controller.

The controller is prewired to be ‘plug n play’ and there is usually no need to remove the cover on installation. The enclosure is water resistant (to rain) and is UV resistant. The case is made of non-burning tough polycarbonate.

Controller includes:

FREE Thermal heat paste for roof sensor installation

1 x 2.5m tank sensor

1 x RJ45 cable

The Senztek controllers come pre-programmed with all leads and plugs fitted for easy plug and play use.

Reclaim Manual

Download Reclaim manual here.

If you're unsure which part suits, simply contact us - click here

Heat Pump Controllers

Brand

Compatible

Item

Price

Quantity

Reclaim Heat Pump Controller V1.1

$340.00

SKU: SHWP0054

$340.00

Shop by Brand

Footer menu