Controller to suit Hills Esteem HSC-01-1
Controller to suit Hills Esteem HSC-01-2
Controller to suit Hills Esteem HSC-01-3

Controller to suit Hills Esteem HSC-01

Solar Hot Water Parts SKU: SHWP0037

$330.00

Not In Stock

Same-Day Dispatch
Order before 3pm and your parts ship today

Free Shipping
On all orders over $150

Expert Advice
Email us sales@solarhotwaterparts.com.au

Description Technical Information Shipping & Delivery Return and Exchanges

This Product Has Been Discontinued

The Controller to suit Hills Esteem HSC-01 is no longer being produced and is not available for purchase.

This page has been retained to help customers searching for this controller and to provide technical reference information.

Recommended Replacement

The Senztek SolaStat-Plus 1-2 Controller is the best replacement option. It has a digital display, which makes ongoing fault finding far easier.

The sensors must be changed when replacing this controller. The Senztek is supplied with both:

  • 1 x 20m roof sensor
  • 1 x 2.5m tank sensor
  • Free thermal heat paste for roof sensor installation

Please contact our team before ordering so we can confirm the correct controller for your system. Email sales@solarhotwaterparts.com.au with a photo of your existing controller.

Technical Reference — Hills Esteem HSC-01

Fitted to Hills Esteem systems from approximately 2007 to 2010. Supplied as a controller only, with a standard flat pin female pump connector — the lead may need changing — and no auxiliary power outlet.

The Hills Esteem Solar Controller was Australian owned and made, and was also used in these brands of solar hot water system: Douglas Solar, Aquamax, Heavenly Solar, Endless Solar, Solar Power and Suntrap Solar.

Hills Esteem HSC-01 solar controller

How it worked

The controller heated the tank water to 75°C and held it there, using sensors on both the solar panel and the tank. When the panel rose 9°C above the tank water, the pump switched on to circulate water through the panel. If the tank reached 75°C, or the panel fell to within 5°C of the tank, the pump switched off. Built-in freeze protection switched the pump on if the panel dropped to 3°C, and off again once it rose to 5°C, to protect the panel and pipework.

Indicator lights showed Power ON, Pump ON, Tank Sensor Error and Collector Sensor Error.

Specifications

  • Maximum tank temperature 75°C
  • Maximum collector temperature 250°C
  • Freeze protection: 3°C to turn ON, 5°C to turn OFF
  • Tank / collector differential: 9°C to turn ON, 5°C to turn OFF
  • Maximum load 240V AC 10 Amp

Add custom text to your tabs

Fees

  • Free delivery within Australia when you spend over $150 in a single order.
  • A postage and handling fee applies to all orders under $150.

Delivery Time:

All deliveries are made 8.30am to 3.00pm Monday to Friday by SHWP’s chosen carrier. For orders placed before 3.00pm on a weekday, please allow from the confirmation of dispatch:

  • 4-6 working days for delivery to a capital city in any State;
  • 5-10 working days for delivery to most large regional towns; and
  • 7-14 working days for delivery to other remote locations.

During peak periods (eg Christmas, Easter) delivery may take up to 14 working days.

Please note that these delivery times are estimates only, and actual delivery times may vary. Large items may require extra handling and may take longer to transport.

For more info check our Shipping and Delivery Policy.

For Returns reach us immediately through our email at sales@solarhotwaterparts.com.au.
Branded parts bought from Solar Hot Water Parts cannot be returned directly to the Brand's store, but with Solar Hot Water Parts.

For more info read our Return Policy.