Fullgauge Microsol Ri Tank Sensor
If you are just replacing the tank sensor on your system, we recommend you check the sensor port or immersion sleeve for moisture. If there is moisture, the sensor port or immersion sleeve will need to be replaced. This is mostly a problem in the older stainless steel hot water tanks. The original sensor port develops pin holes because it is the weaker metal.
Sensors are not designed to be installed in water and the moisture gives them an inaccurate reading. If you find moisture, check the roof
sensor and the circulation pump first before ordering a tank sensor. Just because the pump motor is running does not mean it is circulating
water as it should. With some models of solar hot water systems, your best option may be replacing everything at once with a complete
pump station. Please contact us if you have questions about this before you purchase this item.
It is important that tank sensors are not used as roof sensors. Tank sensors are normally made from PVC cable and not high temperature
silicone cable. Tank sensors are generally only rated to 90 degrees, whereas roof sensors can be rated two to three times higher.
Not all sensors are the same. This is a common mistake because over the years some manufacturers changed controllers multiple times. The
thermistor inside the sensor gives different resistance levels with temperature change and the controller uses the reading to calculate
the differentials required to operate the circulating pump.
There are many different types of controllers that use different types of sensors. If you are unsure, email us a photo of your controller
and we can guide you to the correct sensor.
The image above is of the original sensor. The actual product supplied may differ to this but is an appropriate replacement part for your system. Images
of the solar hot water controllers and original sensors are included in the description of products to assist you to find the appropriate product
for your system (controller is not included in sale price).
Solar Hot Water Parts has the complete Hills solar replacement range. We are continually extending our solar hot water spare parts catalogue to give
you the best selection of solar hot water replacement parts to choose from.
We sell the widest range of spare parts to suit any solar hot water service, whether it be a flat plate panel or evacuated tube solar collector. The Solar
Hot Water Parts range is now online and ready to order, with complete tech specs to ensure your seamless selection.
If you're unsure which part suits, simply contact us - click here