Â
Replacement Solar Hot Water Tank Sensor to suit Dux Solar Hot Water System
When replacing Dux tank sensors, sometimes on the newer models, the tank sensor is located inside the tank at the time of manufacture. They can be replaced, but a new location needs to be created to do so.
If you are just replacing the tank sensor on your system, we recommend you check the sensor port or immersion sleeve for moisture. If there is moisture, the sensor port or immersion sleeve will need to be replaced. This is mostly a problem in the older stainless steel hot water tanks. The original sensor port develops pin holes because it is the weaker metal.
Sensors are not designed to be installed in water and the moisture gives them an inaccurate reading. If you find moisture, check the roof sensor and the circulation pump first before ordering a tank sensor. Just because the pump motor is running does not mean it is circulating water as it should. With some models of solar hot water systems, your best option may be replacing everything at once with a complete pump station. Please contact us if you have questions about this before you purchase this item.
Â
It is important that tank sensors are not used as roof sensors. Tank sensors are normally made from PVC cable and not high temperature silicone cable. Tank sensors are generally only rated to 90 degrees, whereas roof sensors can be rated two to three times higher.
Â
Not all sensors are the same. This is a common mistake because over the years some manufacturers changed controllers multiple times. The thermistor inside the sensor gives different resistance levels with temperature change and the controller uses the reading to calculate the differentials required to operate the circulating pump.
Â
There are many different types of controllers that use different types of sensors. If you are unsure, email us a photo of your controller and we can guide you to the correct sensor.
Â
Solar Hot Water Parts has the complete solar hot water replacement range. We are continually extending our solar hot water spare parts catalogue to give you the best selection of solar hot water replacement parts to choose from.
We sell the widest range of spare parts to suit any solar hot water service, whether it be a flat plate panel or evacuated tube solar collector. The Solar Hot Water Parts range is now online and ready to order, with complete tech specs to ensure your seamless selection.
If you're unsure which part suits, simply contact us - click here Â
Â
Add custom text to your tabs
Fees
- Free delivery within Australia when you spend over $150 in a single order.
- A postage and handling fee applies to all orders under $150.
Delivery Time:
All deliveries are made 8.30am to 3.00pm Monday to Friday by SHWP’s chosen carrier. For orders placed before 3.00pm on a weekday, please allow from the confirmation of dispatch:
- 4-6 working days for delivery to a capital city in any State;
- 5-10 working days for delivery to most large regional towns; and
- 7-14 working days for delivery to other remote locations.
During peak periods (eg Christmas, Easter) delivery may take up to 14 working days.
Please note that these delivery times are estimates only, and actual delivery times may vary. Large items may require extra handling and may take longer to transport.
For more info check our Shipping and Delivery Policy.
For Returns reach us immediately through our email at sales@solarhotwaterparts.com.au.
Branded parts bought from Solar Hot Water Parts cannot be returned directly to the Brand's store, but with Solar Hot Water Parts.
For more info read our Return Policy.
